Subaru 30,000 Mile Recommended Scheduled Maintenance
 |
 |
- Replace engine oil, filter & drain plug washer (up to 5 quarts)
- Inspect and adjust all drive belts to factory specifications
- Inspect and ensure cooling fan is operating within factory specifications
- Inspect transmission fluid condition and transmission operation
- Check to ensure air conditioning & heating systems are operating within factory specifications
- Rotate tires, inspect tread wear and check & adjust tire pressure as needed
- Replace cabin air filter.
- Perform brake system inspection; pads and/or drums, lines, hoses & fluid
- Inspect suspension system and steering components to ensure factory specifications
- Service battery, clean terminals and check battery condition
- Inspect wiper blades and linkage operation
- Lubricate all door, trunk & hood latches and hinges if needed
- Inspect exhaust system and heat shields
- Inspect & clean exterior of radiator
- All wheel drive service; Replaced Trans Fluid and Frt/Rear Diff Fluid
- Inspect radiator & cooling system
- Replace engine coolant and test protection levels
- Adjust emergency brake to within factory specifications as needed
- Replace Spark Plugs
- Inspect steering operation, tie rod ends and steering rack guides per factory specifications
- Inspect all engine and transmission mounts
- Inspect and adjust all fluid levels as needed
- Check all interior & exterior lighting operation
- Renew brake fluid; completely flush brake system and replace fluid
- Cam belt inspection
- Factory trained technician to conduct road test
- Replace Fuel Filter
- Upgrade Transmission service with Complete flush and premium conditioners
- Computer balance all four tires (dealer recommended)
- Align all four wheels (dealer recommended)
Some Models:
Dealer Recommended:
